Do you have the current firmware installed?
Did you remove the OBiPlus firmware and not just stopped using it?
I never used OBiPlus, so I don't know how to remove it.
QuoteWhen I plug the BT dongle into the 1032 and use the above procedure to answer the calls on other 1032s, I do not have a problem.
If it works, why not use the BT adapter on one OBi1032?
On the non-BT 1032s, point the SP4 proxy to the BT 1032's IP address.
Set the IP Phone's Primary Line on the non-BT 1032s to SP4
Set the IP Phone's Primary Line on the BT 1032 to BT
Things I forgot.
If you want to pass CNAM, on the device using the BT adapter:
Service Providers -> ITSP Profile D SIP -> X_SpoofCallerID: Checked
On the BT InboundCallRoute the ";ui=$1" is now optional and can be removed.
If you want a CNAM when you call an extension, set it here:
Voice Services -> SP4 Service -> CallerIDName: Extension 10