I have been trying to setup the one step dialing using 2 OBIs for some days with no success. My current setup is like this
(i) I have an ObI (2001xxxx9) which is setup to use Google Voice on SP1 and Callcentric for e911
(ii) I have a second Obi(2002xxxx0) which has only ObiTalk (no provider configured).
This obi I intend to send to India.
I can successfully make calls from the second Obi to numbers in the US by dialing **92001xxxx9 to reach the AA and then dialing out the required US number.
I want to enable one-step dialling so that when the user in India (ob2) dials any phone number starting with 1 it should dial out using Google Voice configured in OB1.
From reading the Voice gateway secition in the configuration manual that seemd to be the way to acheive this. So I added a VG1 on Ob2 with the the access number specified as PP(ob2001xxxx9) with all the ohter values set to default.
I then modified the phone port (Ob2) as specified in the config manual
{([1-9]x?*(Mpli)):pp},{>(1 xxx xxx xxx):vg1},{(<#:>|911):li},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**8:>(Mli)):li},{(<**9:>(Mpp)):pp},{(Mpli):pli}
I then modified the ObiTalk Service in Ob1 so that now it reads {(2902xxxx5|2002xxxx0)>(xx.):SP1},{>(1 xxx xxx xxxx):sp1},{(2902xxxx5|2002xxxx0):aa},{ph}
But when i try to make a call from Ob2 by dialing 1 xxx xxx xxxx i just get a message that there is no service available.
I tried configuring this both on the obi and also through the portal
Can someone help where I am going wrong in this