Hi all,
I was trying to use an OBi110 as a voice modem replacement for the SPA3102 for my autodialing, (I'm using Voicent
http://voicent.com/autodialers.php) since Cisco doesn't seem to support that anymore. It took me quite a while to figure out how to get this set up and I didn't see this explicitly explained anywhere else so I figured I would share how I managed to make it work.
First, you setup OBiTalk with your OBi110 device and all that. There are tutorials:
http://www.obihai.com/tutorials-tips, although I doubt many people looking at this would need that sort of help.
Once you have an OBi110 on your network, an OBiTalk account, and an OBiON app running etc. then we get to the important part.
To make sure the OBi110 knows you want to use an analog line, you will need to access the OBi110 directly by clicking on the OBi110 in the Dashboard, then going to the Expert OBi Configuration page (or access your OBi110 directly through it's IP address) Go to OBiTalk Service, found under Voice Services, then in the InboundCallRoute field you will need to enter in this:
{(29xxxxxxx)>(xx.):LI},{(29xxxxxxx):aa},{ph}
Replace 29xxxxxxx with your OBi number.
The Voicent software is set up just like x-lite. The SIP ID is your OBi number. And the domain is 127.0.0.1
