I have OBi202 operating at 192.168.30.35 and I'll be using it to make internal and national calls only.
For initial test, I've downloaded CSipSimple app from Google Playstore to register my android phones to
192.168.30.35.
Now, the two have successfully registered with it. However, when I'm trying to dial their directory number, I'm receiving a "486 / Busy here" error output.
Here's my configuration in Obi202:
ITSP Profile CGeneral/Signaling Protocol - SIP
General/DigitMap - (1xxxxxxxxxx |<1>[2-9]xxxxxxxxx| 100x | 011xx.|xx.|(Mipd)|[^*#]@@.)
SIP/ProxyServer - 192.168.30.114 (IP Address of my android phone)
SIP/ProxyServer Port - 5060
SIP/RegistrarServer - 192.168.30.35
SIP/RegistrarServerPort - 5060
SIP/OutboundProxy - 192.168.30.35
SIP/OutboundProxyPort - 5060
SIP/X_SpoofCallerID - checked (enabled)
SP3 Service
X_ServProvProfile - C
X_RingProfile - B
X_InboundCallRoute - {(1001):SP4}
X_RegisterEnable - Unchecked (Disabled)
DirectoryNumber - 1002
X_Proxy - checked (enabled)
AuthUserName - 1002
AuthPassword - 1234567
---------------------
ITSP Profile DGeneral/Signaling Protocol - SIP
General/DigitMap - (1xxxxxxxxxx |<1>[2-9]xxxxxxxxx| 100x | 011xx.|xx.|(Mipd)|[^*#]@@.)
SIP/ProxyServer - 192.168.30.117 (IP Address of my android phone)
SIP/ProxyServerPort - 5060
SIP/RegistrarServer - 192.168.30.35
SIP/RegistrarServerPort - 5060
SIP/OutboundProxy - 192.168.30.35
SIP/OutboundProxyPort - 5060
SIP/X_SpoofCallerID - checked (enabled)
SP4 Service
X_ServProvProfile - D
X_RingProfile - B
X_InboundCallRoute - {(1002):SP3}
X_RegisterEnable - Unchecked (Disabled)
DirectoryNumber - 1001
X_Proxy - checked (enabled)
AuthUserName - 1001
AuthPassword - 12345678
Everything didn't mention was set to default. Need your assistance. Thank you!