How do I dial out on SP2 with SP1 the outgoing default?

[win32]

I have Google Voice as my SP1 and Callcentric as my SP2. I dial out on GV.

I can press # to dial out on my land line.

How do I dial out on Callcentric?

[zapattack]

In the   FAQ page, About The Obi heading, click View More: 
read "How do I make calls with the OBi & what is Primary Line to Call Out?" section

[claude]

**1 is your sp1 **2 is your sp2

so you dial   **2xxxxxxxxxx            x= your phone number

[win32]

Thanks claude! I think I might have even stumbled on that experimenting but it doesn't give you a dialtone (like # does) so I didn't realize.

[hwittenb]

You get the new dial tone when you key # because it comes from your phone company when the OBi attaches directly to the PSTN line.  You can configure the OBi to give you new dial tone when you dial **1 or **2 if you change the PhonePort Digitmap and put |**1{t=di2}(Msp1)| and |**2{t=di2}(Msp2)| to replace |**1(Msp1)| and |**2(Msp2)|

[win32]

You can configure the OBi to give you new dial tone when you dial **1 or **2 if you change the PhonePort Digitmap and put |**1{t=di2}(Msp1)| and |**2{t=di2}(Msp2)| to replace |**1(Msp1)| and |**2(Msp2)|

Nice!  Thanks for that. I am new to telecom, is that instruction set a standard of some kind?

I guess I will go read the admin guide...

[hwittenb]

I am new to telecom, is that instruction set a standard of some kind?

I guess I will go read the admin guide...

The settings are proprietary to OBihai but are covered in the Admin Guide.  You find the dial tone settings on page 187 .... Invoke Second Dial Tone in Digit Map