This is a description of some issues I was having installing the OBI 202 with the wifi adapter and how I resolved them.
I was setting up my Obi 202 with the wifi adapter and I ran into the following problem. No matter what I did, I could not load the wifi admin configuration page on my browser. This is the page you get to by typing 192.168.10.1 or
obiconnect.com/wifi and when you get there it is supposed to open a box asking for login and password of which the default are admin and admin. So obi troubleshooting told me to try and press *27 from a phone connected to the obi and then try and connect from a laptop to the wifi site which I gather emanates from the obi itself. I think the ssid for the site is something like OBIWIFI – it just shows up as an available wifi network once you do the *27 thing. I connected my laptop to that network (which took a while since the connection is not that strong) and once again went to the above 2 web sites, the IP address and the
obiconnect.com/wifi, and still no box popped up to log into the configuration. At this point I contacted obi support and they told me to leave all as is but run a lan cable from the lan port directly to my laptop. When I did that, and typed in the IP or the
obiconnect.com/wifi I immediately got a pop up box asking for my login and password, and from there it took me to a page where I was given a choice of wifi networks which were available to be joined. I chose the one I wanted and it connected, and afterwards I was able to remove the lan cable and use the OBI on wifi only.