I just tried another round and no good. I once again removed GV on sp1 and setup Localphone instead. I tried many combinations of
localphone.com,
proxy.localphone.com port 5060, port 5070, port 5061. The only thing that would register was
proxy.localphone.com with 5060, but that caused audio issues. Other combos wouldn't even register.
Erased the settings and replaced them with Callcentric. Boom! First try worked. Port 5060. So localphone is temperamental.
After the trial, I put GV back on sp1 since that is the most reliable.
The main targets seem to be, (based on readings):
-port 5060 on uverse router is flaky (don't know how to make this work)
-need STUN (I need instructions)
- disable SIP/AGL on router (don't think is possible on uverse 3600)
Why is only Localphone so screwy?
If I want to test the voice gateway, what do I need to do, and do I again need to remove GV from the SP slot? Can you have Localphone on a gateway even if you have the sp set to another provider? What is the likelihood 2way voice will work on a gateway even though it fails on sp?
I know that's a lot of questions, but I'm trying to give all info I have, and not really a whiz at this stuff.