Quote from: Jumbo on April 18, 2014, 07:03:18 AM
Quick followup question on this.. if CallCentric is registered as SP2 and if I want to use CircleNet as outbound on SP2, what changes do I need to make?
Appreciate the help, thanks!
You can share an SP trunk with 2 services by using a Voice Gateway.
Voice Gateways are used with outbound only providers that don't need to register.
CircleNet fits this category.
Keep GV on SP1.
Define Callcentric on SP2
Define CircleNet on Voice Gateway 1:
Voice Services -> Gateways and Trunk Groups -> Voice Gateway1
Name: CircleNet
AccessNumber: sp2(outbound.circlenet.us)
DigitMap: (<8:>1xxxxxxxxxx|<8:1>xxxxxxxxxx|<8:1aaa>xxxxxxx|<8:>011xxxxxx.S3)
AuthUserID: Your_CircleNet_ID (10 digit ID)
AuthPasssword: Your_CircleNet_Password
aaa is your local area code. This is used for 7 digit dialing.
Add to the beginning of the Phone Port OutboundCallRute:
{(Mvg1):vg1},
Continue to use GV as you are currently.
To use CircleNet dial as follows:
814805551212 or
84805551212 or
85551212 or
8011............
After May 15th change the Voice Gateway DigitMap to:
(1xxxxxxxxxx|<1>xxxxxxxxxx|<1aaa>xxxxxxx|011xxxxxx.S3)
Dial without the "8" prefix to use CircleNet.