The following works on my Obi110 to Call Forward my basic POTS
Line that has "No Features" to one of my VoIP phone numbers.
The same method should work in one of the "SPx" profiles to route
incoming calls from a VoIP provider to another phone number.
Obi110 LINE Port {in OBiTalk Expert Mode}
InboundCallRoute {sp2(1987654321)}
Notes:
> The "InboundCallRoute" is configured with the Call Forward entry
on the "spX" port that the call will come in on {Line, sp1 or sp2}.
> The "spX" port used for the Forwarded Outgoing Call requires a
valid VoIP service provider configuration.
> The incoming call is on a "spX" port different from the "spX" port that
will handle the outgoing forwarded call.
On my Obi110, I have the following configured.
> LINE Port = Basic POTS Line {NO Features}
> sp1 =
VoIP.ms> sp2 = Google Voice